10″ Resin-Set DRS® Utility and Sink Brush, Medium Stiff Bristles
10″ Resin-Set DRS® utility and sink brush, polypropylene block, filled medium polyester bristle. This is a real must-have in any demanding kitchen. With a small surface area and short easily gripped handle, it is a really effective pot and board scrub, and spot cleaner. It is perfect for cleaning off chopping boards, soft enough to get in grooves, not too ‘flicky’, resilient enough for a good scrubbing action without crushing.
Hillbrush has developed a unique dual approach to retaining tufts by both staple and resin within their hygiene brush range. The tuft is first punched into the brush back with a stainless steel staple, then Epoxy resin is floated into a recess on the face of the brush. The resin permeates the bottom of the hole, covering the filaments and the staples as it goes. This makes the chance of a filament pulling out, extremely remote and it inhibits the accumulation of dirt or moisture around the filaments.
Specification Sheet and Declaration of Conformity Document
Trim(Bristle) Length: 1″