Description
16″ Metal Detectable and Resin-Set DRS® Hand Brush
Dark blue polypropylene block, filled stiff grey polyester. The block, filaments and resin are metal detectable and X-ray visible. Should any part of the brush get into a production line, it will likely be detected by most correctly calibrated metal detection systems. Ask for sample fibers to conduct your own tests. The gripped handle is comfortable to use even in gloved hands.
FDA Compliant
Resin-Set DRS®
Hillbrush has developed a unique dual approach to retaining tufts by both staple and resin within their hygiene brush range. The tuft is first punched into the brush back with a stainless steel staple, then Epoxy resin is floated into a recess on the face of the brush. The resin permeates the bottom of the hole, covering the filaments and the staples as it goes. This makes the chance of a filament pulling out, extremely remote and it inhibits the accumulation of dirt or moisture around the filaments.
Specification Sheet and Declaration of Conformity Document
Length: 16″
Width: 2″
Height: 4.5″
Trim(Bristle) Length: 1.5″