Description
12″ Resin-Set DRS® Scrub Brush, Stiff Bristles
12″ Resin-Set DRS® scrub brush, polypropylene block euro threaded, filled stiff polyester bristles. The bristle is 0.024″ diameter and extends 1.625″ out. Recommended for spot-type cleaning on slightly less even surfaces, and for smaller areas where soiling is likely to be harder to remove. This is because the filaments will give more easily to reach dips, and there are a lot more filaments to the square inch, allowing more intense cleaning.
FDA Compliant
Resin-Set DRS®
Hillbrush has developed a unique dual approach to retaining tufts by both staple and resin within their hygiene brush range. The tuft is first punched into the brush back with a stainless steel staple, then Epoxy resin is floated into a recess on the face of the brush. The resin permeates the bottom of the hole, covering the filaments and the staples as it goes. This makes the chance of a filament pulling out, extremely remote and it inhibits the accumulation of dirt or moisture around the filaments.
Length: 12″
Width: 3″
Height: 4.25″
Trim(Bristle) Length: 1.75″
